How To Repair The Flange On A Pedestal Sink
What information technology lacks in storage space, a pedestal sink makes up for in loftier fashion. How you install a pedestal sink varies past manner and manufacturer. Installing a pedestal sink involves completing several individual tasks and then connecting everything. You purchase the faucet, drain, and popular-up assembly separately. Before y'all install the sink, install the drain, pop-up associates, and faucet.
Before yous buy a pedestal sink, remove the onetime sink and measure the location of the plumbing lines and then that y'all tin can choose a new sink that matches upwards with them. To get these rough-in dimensions, brand a sketch of the wall and annotation the post-obit measurements:
-
Altitude from the floor (or wall) to where the drain enters the wall (or floor)
-
Distance between the flooring and the water supply pipes
-
Altitude right to left from each water supply pipe to the drain
Sit on the flooring with the sketch in paw and visualize how the dorsum of the pedestal sink will match up with the supply lines. Besides, check the sink's specifications and rough-in dimensions. You can practise this crude measuring by finding sinks that you lot like at a home center; note the manufacturer, style, and model number so visit the manufacturer'southward website. Most manufacturers provide specifications and rough-in dimensions online, so deciding what fits and what doesn't is easy.
Installing the drain and popular-up assembly
Carefully read the directions that come with the unit that you purchase to familiarize yourself with the parts and how they fit together.
The drain consists of pipes that attach to the sink and atomic number 82 to the trap.
-
Thread the large locknut onto the drain body.
-
Slip the flat washer and then the wedge-shaped safety gasket onto the drain body.
-
Place a sparse bead of plumber's putty around the underside of the drain flange.
-
Push the drain body up through the hole in the lesser of the sink.
-
Thread the drain flange into the torso of the drain.
-
Turn the bleed torso so that the opening for the pivot rod mechanism faces the dorsum of the sink.
-
Using groove-joint pliers, tighten the locknut on the bleed from the underside of the sink until the plumber's putty is compressed and the flange looks and feels tight.
Assembling the pivot rod
The pivot rod operates the mechanism that opens and closes the drain. Nearly units have a rod with a brawl on it that operates the bleed plug. To assemble this mechanism, follow these steps:
-
If the retaining nut is screwed onto the valve torso, remove it and the washers. If non, skip this step.
-
Slide the washer seal over the short cease of the pivot rod.
-
Insert the brusk stop of the pivot rod into the bleed body and thread on the nut.
Don't tighten information technology withal.
-
Insert the popular-up rod through the hole in the faucet's body.
-
Push the pivot rod all the way down.
-
Connect the extension rod (the brusk arm through which the pivot rod extends) by placing the pivot rod in the first or 2d hole of the extension rod and sliding the pop-upwards rod into the extension rod.
-
Pull the rod all the way downwardly and tighten the thumbscrew.
About This Article
This article tin be found in the category:
- Sinks & Garbage Disposals ,
Source: https://www.dummies.com/home-garden/home-improvement/kitchen-bath-remodeling/how-to-install-the-drain-for-a-pedestal-sink/
Posted by: hufffavered.blogspot.com
0 Response to "How To Repair The Flange On A Pedestal Sink"
Post a Comment